Application of Residual Profit Split. (i) XYZ is a U.S. corporation that develops, manufactures and markets a line of products for police use in the United States. XYZ’s research unit developed a bulletproof material for use in protective clothing and headgear (Nulon). XYZ obtains patent protection for the chemical formula for Nulon. Since its introduction in the U.S., Nulon has captured a substantial share of the U.S. market for bulletproof material. (ii) XYZ licensed its European subsidiary, XYZ-Europe, to manufacture and market Nulon in Europe. XYZ-Europe is a well- established company that manufactures and markets XYZ products in Europe. XYZ-Europe has a research unit that adapts XYZ products for the defense market, as well as a well-developed marketing network that employs brand names that it developed. (iii) XYZ-Europe’s research unit alters Nulon to adapt it to military specifications and develops a high-intensity marketing campaign directed at the defense industry in several European countries. Beginning with the 1995 taxable year, XYZ-Europe ... Read more

The relative value of each controlled taxpayer’s contribution to the success of the relevant business activity must be determined in a manner that reflects the functions performed, risks assumed, and resources employed by each participant in the relevant business activity, consistent with the comparability provisions of § 1.482-1(d)(3). Such an allocation is intended to correspond to the division of profit or loss that would result from an arrangement between uncontrolled taxpayers, each performing functions similar to those of the various controlled taxpayers engaged in the relevant business activity. The profit allocated to any particular member of a controlled group is not necessarily limited to the total operating profit of the group from the relevant business activity. For example, in a given year, one member of the group may earn a profit while another member incurs a loss. In addition, it may not be assumed that the combined operating profit or loss from the relevant business activity should be shared equally, or ... Read more

The profit split method evaluates whether the allocation of the combined operating profit or loss attributable to one or more controlled transactions is arm’s length by reference to the relative value of each controlled taxpayer’s contribution to that combined operating profit or loss. The combined operating profit or loss must be derived from the most narrowly identifiable business activity of the controlled taxpayers for which data is available that includes the controlled transactions (relevant business activity) ... Read more

15. The facts are the same as Example 1, except that the per-unit value of Service 2 is 120 (that is, both Service 1 and Service 2 are equally valuable, and neither are low-value services). 16. Under the CCA, the value of Company A and Company B’s contributions should each correspond to their respective proportionate shares of expected benefits i.e. 50%. Since the total value of contributions under the CCA is 6 000, this means each party must contribute 3 000. The value of Company A’s in-kind contribution is 3 600. The value of Company B’s in- kind contribution is 2 400. Accordingly, Company B should make a balancing payment to Company A of 600. This has the effect of “topping up” Company B’s contribution to 3 000; and offsets Company A’s contribution to the same amount. Example 3 illustrates that, in general, assessing contributions at cost will not result in an arm’s length outcome even in those situations in ... Read more

Example 2 12. The facts are the same as Example 1, except that the per-unit value of Service 1 is 103 (that is, both Service 1 and Service 2 are low-value services). Assume, therefore, that the calculation of the costs and value of the services is as follows: Cost to Company A of providing services (30 units * 100 per unit) 3 000 (60% of total costs) Cost to Company B of providing services (20 units * 100 per unit) 2 000 (40% of total costs Total cost to group 5 000 Value of contribution made by Company A (30 units * 103 per unit) 3 090 (59.5% of     total contributions) Value of contribution made by Company B (20 units * 105 per unit) 2 100 (40.5% of     total contributions) Total value of contributions made under the CCA 5 190 Company A and Company B each consume 15 units of Service 1 and 10 units of Service 2: Benefit to Company ... Read more

It is also sometimes suggested that a profit split analysis can be applied to transfers of partially developed intangibles. In such an analysis, the relative value of contributions to the development of intangibles before and after a transfer of the intangibles in question is sometimes examined. Such an approach may include an attempt to amortise the transferor’s contribution to the partially developed intangible over the asserted useful life of that contribution, assuming no further development. Such approaches are generally based on projections of cash flows and benefits expected to arise at some future date following the transfer and the assumed successful completion of further development activities ... Read more

In considering the arm’s length compensation for functional contributions of various members of the MNE group, certain important functions will have special significance. The nature of these important functions in any specific case will depend on the facts and circumstances. For self-developed intangibles, or for self-developed or acquired intangibles that serve as a platform for further development activities, these more important functions may include, among others, design and control of research and marketing programmes, direction of and establishing priorities for creative undertakings including determining the course of “blue-sky” research, control over strategic decisions regarding intangible development programmes, and management and control of budgets. For any intangible (i.e. for either self-developed or acquired intangibles) other important functions may also include important decisions regarding defence and protection of intangibles, and ongoing quality control over functions performed by independent or associated enterprises that may have a material effect on the value of the intangible. Those important functions usually make a significant contribution to ... Read more

The relative value of contributions to development, enhancement, maintenance, protection, and exploitation of intangibles varies depending on the particular facts of the case. The MNE group member(s) making the more significant contributions in a particular case should receive relatively greater remuneration. For example, a company that merely funds research and development should have a lower anticipated return than if it both funds and controls research and development. Other things being equal, a still higher anticipated return should be provided if the entity funds, controls, and physically performs the research and development. See also the discussion of funding in Section B.2.2 ... Read more

The relative importance of contributions to the creation of intangible value by members of the group in the form of functions performed, assets used and risks assumed will vary depending on the circumstances. For example, assume that a fully developed and currently exploitable intangible is purchased from a third party by a member of a group and exploited through manufacturing and distribution functions performed by other group members while being actively managed and controlled by the entity purchasing the intangible. It is assumed that this intangible would require no development, may require little or no maintenance or protection, and may have limited usefulness outside the area of exploitation intended at the time of the acquisition. There would be no development risk associated with the intangible, although there are risks associated with acquiring and exploiting the intangible. The key functions performed by the purchaser are those necessary to select the most appropriate intangible on the market, to analyse its potential benefits ... Read more

Internal data are essential to assess the values of the respective contributions of the parties to the controlled transaction. The determination of such values should rely on a functional analysis that takes into account all the economically significant functions, assets and risks contributed by the parties to the controlled transaction. In those cases where the profit is split on the basis of an evaluation of the relative importance of the functions, assets and risks to the value added to the controlled transaction, such evaluation should be supported by reliable objective data in order to limit arbitrariness. Particular attention should be given to the identification of the relevant contributions of unique and valuable intangibles and the assumption of economically significant risks and the importance, relevance and measurement of the factors which gave rise to these ... Read more

However, it can be difficult to find reliable comparables data that can be used in this manner. Nevertheless, external market data can be relevant in the profit split analysis to assess the value of contributions that each associated enterprise makes to the transactions. In effect, the assumption is that independent parties would have split relevant profits in proportion to the value of their respective contributions to the generation of profit in the transaction. Thus, where there is no more direct evidence of how independent parties in comparable circumstances would have split the profit in comparable transactions, the allocation of profits may be based on the relative contributions of the parties, as measured by their functions, assets used and risks assumed ... Read more

It can be difficult to determine the relative value of the contribution that each of the associated enterprises makes to the relevant profits, and the approach will depend on the facts and circumstances of each case. The determination might be made by comparing the nature and degree of each party’s contribution of differing types (for example, provision of services, development expenses incurred, assets used or contributed, capital invested) and assigning a percentage based upon the relative comparison and external market data. See Section C.5 for a discussion of how to split the relevant profits ... Read more

Under a contribution analysis, the relevant profits, which are the total profits from the controlled transactions under examination, are divided between the associated enterprises in order to arrive at a reasonable approximation of the division that independent enterprises would have achieved from engaging in comparable transactions. This division can be supported by comparables data where available. In the absence thereof, it should be based on the relative value of the contributions by each of the associated enterprises participating in the controlled transactions, determined using information internal to the MNE group, as a proxy for the division that independent enterprises would have achieved (see Section C.5.2). In cases where the relative value of the contributions can be measured, it may not be necessary to estimate the actual market value of each party’s contributions ... Read more

Where the contributions are highly inter-related or inter-dependent upon each other, the evaluation of the respective contributions of the parties may need to be done holistically. That is, a high degree of integration may also affect whether contributions by the enterprises are considered to be unique and valuable. For instance, a unique contribution by one party may have a significantly greater value when considered in combination with the particular unique contribution of the other party. Paragraphs 6.93-6.94 discuss this issue in relation to the combination of intangibles. See also Example 9 in Annex II to Chapter II ... Read more

A further strength of the transactional profit split method is that all relevant parties to the transaction are directly evaluated as part of the pricing of the transaction, that is, the contributions of each party to the transaction are specifically identified and their relative values measured in order to determine an arm’s length compensation for each party in relation to the transaction ... Read more

Internal data are essential to assess the values of the respective contributions of the parties to the controlled transaction. The determination of such values should rely on a functional analysis that takes into account all the economically significant functions, assets and risks contributed by the parties to the controlled transaction. In those cases where the profit is split on the basis of an evaluation of the relative importance of the functions, assets and risks to the value added to the controlled transaction, such evaluation should be supported by reliable objective data in order to limit arbitrariness. Particular attention should be given to the identification of the relevant contributions of unique and valuable intangibles and the assumption of economically significant risks and the importance, relevance and measurement of the factors which gave rise to these ... Read more

However, it can be difficult to find reliable comparables data that can be used in this manner. Nevertheless, external market data can be relevant in the profit split analysis to assess the value of contributions that each associated enterprise makes to the transactions. In effect, the assumption is that independent parties would have split relevant profits in proportion to the value of their respective contributions to the generation of profit in the transaction. Thus, where there is no more direct evidence of how independent parties in comparable circumstances would have split the profit in comparable transactions, the allocation of profits may be based on the relative contributions of the parties, as measured by their functions, assets used and risks assumed ... Read more

It can be difficult to determine the relative value of the contribution that each of the associated enterprises makes to the relevant profits, and the approach will depend on the facts and circumstances of each case. The determination might be made by comparing the nature and degree of each party’s contribution of differing types (for example, provision of services, development expenses incurred, assets used or contributed, capital invested) and assigning a percentage based upon the relative comparison and external market data. See section C.5 for a discussion of how to split the relevant profits ... Read more

Under a contribution analysis, the relevant profits, which are the total profits from the controlled transactions under examination, are divided between the associated enterprises in order to arrive at a reasonable approximation of the division that independent enterprises would have achieved from engaging in comparable transactions. This division can be supported by comparables data where available. In the absence thereof, it should be based on the relative value of the contributions by each of the associated enterprises participating in the controlled transactions, determined using information internal to the MNE group, as a proxy for the division that independent enterprises would have achieved (see section C.5.2). In cases where the relative value of the contributions can be measured, it may not be necessary to estimate the actual market value of each party’s contributions ... Read more

Where the contributions are highly inter-related or inter-dependent upon each other, the evaluation of the respective contributions of the parties may need to be done holistically. That is, a high degree of integration may also affect whether contributions by the enterprises are considered to be unique and valuable. For instance, a unique contribution by one party may have a significantly greater value when considered in combination with the particular unique contribution of the other party. Paragraphs 6.93–6.94 discuss this issue in relation to the combination of intangibles. See also Example 9 in Annex II to Chapter II ... Read more

A further strength of the transactional profit split method is that all relevant parties to the transaction are directly evaluated as part of the pricing of the transaction, that is, the contributions of each party to the transaction are specifically identified and their relative values measured in order to determine an arm’s length compensation for each party in relation to the transaction ... Read more

15. The facts are the same as Example 1, except that the per-unit value of Service 2 is 120 (that is, both Service 1 and Service 2 are equally valuable, and neither are low-value services). 16.          Under the CCA, the value of Company A and Company B’s contributions should each correspond to their respective proportionate shares of expected benefits i.e. 50%. Since the total value of contributions under the CCA is 6 000, this means each party must contribute 3 000. The value of Company A’s in-kind contribution is 3 600. The value of Company B’s in- kind contribution is 2 400. Accordingly, Company B should make a balancing payment to Company A of 600. This has the effect of “topping up” Company B’s contribution to 3 000; and offsets Company A’s contribution to the same amount. Example 3 illustrates that, in general, assessing contributions at cost will not result in an arm’s length outcome even in those situations in which the arm’s ... Read more

Example 2 12. The facts are the same as Example 1, except that the per-unit value of Service 1 is 103 (that is, both Service 1 and Service 2 are low-value services). Assume, therefore, that the calculation of the costs and value of the services is as follows: Cost to Company A of providing services (30 units * 100 per unit) 3 000 (60% of total costs) Cost to Company B of providing services (20 units * 100 per unit) 2 000 (40% of total costs Total cost to group 5 000 Value of contribution made by Company A (30 units * 103 per unit) 3 090 (59.5%     of     total contributions) Value of contribution made by Company B (20 units * 105 per unit) 2 100 (40.5%     of     total contributions) Total value of contributions made under the CCA 5 190 Company A and Company B each consume 15 units of Service 1 and 10 units of Service 2: Benefit to Company ... Read more

Case NamePDFDescriptionDateCourtCatagoriesKeywordshf:categories Top 5 TP News Contact us…Need help? Share your knowledge About the site www.aibidia.com ... Read more

The relative importance of contributions to the creation of intangible value by members of the group in the form of functions performed, assets used and risks assumed will vary depending on the circumstances. For example, assume that a fully developed and currently exploitable intangible is purchased from a third party by a member of a group and exploited through manufacturing and distribution functions performed by other group members while being actively managed and controlled by the entity purchasing the intangible. It is assumed that this intangible would require no development, may require little or no maintenance or protection, and may have limited usefulness outside the area of exploitation intended at the time of the acquisition. There would be no development risk associated with the intangible, although there are risks associated with acquiring and exploiting the intangible. The key functions performed by the purchaser are those necessary to select the most appropriate intangible on the market, to analyse its potential benefits ... Read more