Tag: Standard of comparability

§ 1.482-1(e)(2)(iii)(C) Interquartile range.

For purposes of this section, the interquartile range is the range from the 25th to the 75th percentile of the results derived from the uncontrolled comparables. For this purpose, the 25th percentile is the lowest result derived from an uncontrolled comparable such that at least 25 percent of the results are at or below the value of that result. However, if exactly 25 percent of the results are at or below a result, then the 25th percentile is equal to the average of that result and the next higher result derived from the uncontrolled comparables. The 75th percentile is determined analogously ... Read more

§ 1.482-1(e)(2)(iii)(B) Adjustment of range to increase reliability.

If there are no uncontrolled comparables described in paragraph (e)(2)(iii)(A) of this section, the arm’s length range is derived from the results of all the uncontrolled comparables, selected pursuant to paragraph (e)(2)(ii) of this section, that achieve a similar level of comparability and reliability. In such cases the reliability of the analysis must be increased, where it is possible to do so, by adjusting the range through application of a valid statistical method to the results of all of the uncontrolled comparables so selected. The reliability of the analysis is increased when statistical methods are used to establish a range of results in which the limits of the range will be determined such that there is a 75 percent probability of a result falling above the lower end of the range and a 75 percent probability of a result falling below the upper end of the range. The interquartile range ordinarily provides an acceptable measure of this range; however a different statistical method may ... Read more

§ 1.482-1(e)(2)(iii)(A) In general.

The arm’s length range will consist of the results of all of the uncontrolled comparables that meet the following conditions: the information on the controlled transaction and the uncontrolled comparables is sufficiently complete that it is likely that all material differences have been identified, each such difference has a definite and reasonably ascertainable effect on price or profit, and an adjustment is made to eliminate the effect of each such difference ... Read more

§ 1.482-1(e)(2)(ii) Selection of comparables.

Uncontrolled comparables must be selected based upon the comparability criteria relevant to the method applied and must be sufficiently similar to the controlled transaction that they provide a reliable measure of an arm’s length result. If material differences exist between the controlled and uncontrolled transactions, adjustments must be made to the results of the uncontrolled transaction if the effect of such differences on price or profits can be ascertained with sufficient accuracy to improve the reliability of the results. See § 1.482-1(d)(2) (Standard of comparability). The arm’s length range will be derived only from those uncontrolled comparables that have, or through adjustments can be brought to, a similar level of comparability and reliability, and uncontrolled comparables that have a significantly lower level of comparability and reliability will not be used in establishing the arm’s length range ... Read more

§ 1.482-1(d)(2) Standard of comparability.

In order to be considered comparable to a controlled transaction, an uncontrolled transaction need not be identical to the controlled transaction, but must be sufficiently similar that it provides a reliable measure of an arm’s length result. If there are material differences between the controlled and uncontrolled transactions, adjustments must be made if the effect of such differences on prices or profits can be ascertained with sufficient accuracy to improve the reliability of the results. For purposes of this section, a material difference is one that would materially affect the measure of an arm’s length result under the method being applied. If adjustments for material differences cannot be made, the uncontrolled transaction may be used as a measure of an arm’s length result, but the reliability of the analysis will be reduced. Generally, such adjustments must be made to the results of the uncontrolled comparable and must be based on commercial practices, economic principles, or statistical analyses. The extent and ... Read more